Categories
Topics

The Difference Between Single vs. Three-Phase AC Voltage Most of us are familiar with the single phase voltage in our homes provided by the local utility. For the US, this is typically 120V. For single phase voltage, the voltage is expressed as a Line to Neutral voltage between two power conductors (plus a safety ground). […]
- Blogs

What is Inrush Current? While inrush current has a peak current value, the term “Inrush Current” is commonly used to describe the current that is required to energize an AC powered device or product when first applying voltage and power to it. This is especially true for inductive loads such as transformers, Inductors and electric […]
- Blogs

What Is Programmable Impedance (Prog. Z)? Hate to disappoint, but programmable Z on an AC power source has nothing to do with getting sufficient sleep. Instead, the Z refers to the output impedance of the power source. A low AC source output impedance means there is little or no voltage drop at the output of […]
- Blogs

What are voltage modes? While all programmable AC power sources offer AC output mode, some also provide DC output mode. This may be useful for applications where only DC is required to power an EUT. However, a growing number of power related products are coming on the market than can operate from both AC grid […]
- Blogs

What is Voltage Distortion? Voltage distortion occurs when an AC output is purely sinusoidal but has small levels of voltage harmonics in addition to the fundamental sinewave frequency. This low level of voltage distortion is often difficult to see on an oscilloscope and requires a power analyzer or harmonics analyzer to quantify. Distortion is typically […]
- Blogs