• Monitor power source status and preview power source
• Output Sequences Create arbitrary waveforms via Import, Harmonic entry, or Freehand draw
• Connect to a virtual AFX using simulation files and update settings offline

• Capture and record commands and queries sent to your Power Source over LAN, USB, GPIB or RS232
• Create and execute output sequences based on time or cycle variations of voltage or frequency
• View, print, save and/or export .csv files of UPC metered values and settings

The PPSC Control Panel provides quick and easy operation of your AC & DC Power Source. PPSC Studio will automatically determine your Power Source’s configuration and offer the appropriate options, if installed on your Power Source.

You can quickly set up the output of the AC Power Source depending upon your needs and enable the output for testing with the following controls:

Selecting the Metering Screen will display measured output values.

PPSC Studio’s Waveform Editor allows you to view all waveforms stored in your power source. With the Waveform Editor almost any waveform may be produced using tools like Freehand draw, Harmonic and Phase angle values, Ring Waveform wizard, and a wide range of import features.

The title bar of the waveform editor window shows the location of the waveforms contained in the window. In the example below, these waveforms are currently loaded into your UPC.

The waveform editor allows you to import, export, edit, print, or create arbitrary waveforms. Note that waveform 1 (Sine) is reserved meaning the contents cannot be changed, however you can edit the Title and Comments for waveform 1.

The Output Sequencer allows you to link waveforms to your power source controller programs. When an Output Sequence is executed PPSC Studio quickly downloads any waveforms used by the Output Sequence into power source controller prior to executing.

Transient creation has been simplified by allowing you to program Transient Segments as a percentage of the Steady State voltage or with a duration defined in cycles or seconds. The Transient Graph shows a graphical representation of the transient segments. Clicking in the graph highlights that segment. The graph shows the values as they transition from one segment to the next starting with the steady state values.

PPSC Studio’s “Control” soft panel provides a simple and effective means by which to test remote communications as well as save and restore all set-up, programs and waveforms.